A round pedestal kitchen table offers everyone a place to sit with the ability to see each other, but whoever feels the legs have a less comfortable meal.
12 Photos Gallery of: How to Make a Round Pedestal Kitchen Table
- Cut a circle in plywood 1 inch (2.5 cm) with the saw. The diameter should be three-quarters the size of the table, and will be the base of the round pedestal kitchen table.
- Place metal flanges 3 inches (7.5 cm) in the center of the pedestal base.
- Use with drill pilot holes 1/16 in each pencil mark.
- Sand the entire surface of the plywood with 120 grit sandpaper to remove any imperfections left by the saw or drill.
- Screw the bracket to the round pedestal kitchen table base with screws 1 inch (2.5 cm).
- Place a second flange in the center of the table at the bottom and mark the holes for the screws.
- Drill pilot holes into the pencil marks, being careful not to cross the table.
- Screwing the second flange to the bottom of the table, with screws that go with the thickness of the table.
- Screwed pipe 30 inches (75 cm) and 3 inches (7.5 cm) in diameter at the flange which is joined to the pedestal base.
- Rub the tube and the flange attached to the pedestal base with steel wool to roughen the surface.